Using wood filament, you can print objects that look and feel like wood.
Wood filament is not just wood. In most cases, PLA is used as a substrate, and wood fibers are added to the plastic to give it the look and feel of solid wood. Compared with ordinary PLA, it is usually necessary to lower the printing temperature
Description:
Natural
Good wood texture
No peculiar smell and no poison during printing
Contains a small amount of wood flour ratio
Can smell woody fragrance when printing
100% no bubble,Neatly wound
| inting temperature | 195-220℃ |
| Printing bed temperature | 50℃ |
| Printing speed | 30-60mm/s |
| Pull (KGF) | ≥60MPa |
| Elongation at break | ≥2.0% |
| Water absorption: | 0.5% |
| Density: | 1.25±0.05 g/cm³ |
| Flexural modulus: | ≥60 MPa |
| Diameters | 1.75mm/3mm |
| Net Weight | 1kg |
| Tolerance | ±0.02mm |
